Retrocycle Harley Motorcycle Parts


1 Mars Ct. Unit 3
Boonton, NJ 07005
973-291-8588
 

0 Items in cart
Featured Bike:
2004 Harley Davidson Deuce FXSTD
ALL ---» Engine ---» Cams / parts

46752: S&S T/C 88 CAMSHAFTS INSTALLATION SUPPORT KIT. INCLUDES COVER GASKET BOTH BEARING SETS AND SNAP RING.RECOMMENDED FOR USE WITH ANY S&S CAM SETS FOR TWIN CAM MOTORS. MFG# 33-5163 (OEM: 33-5163)

Click to see in catalog
Click to see in catalog
Picture may not correctly
represent this product.
S&S T/C 88 CAMSHAFTS INSTALLATION SUPPORT KIT. INCLUDES COVER GASKET  BOTH BEARING SETS AND SNAP RING.RECOMMENDED FOR USE WITH ANY S&S CAM SETS FOR TWIN CAM MOTORS. MFG# 33-5163
S&S Gear Drive Cam Kits for Twin Cam 88 Engines
Picture may not correctly represent this product.

See in 2011 Catalog
By S & S Cycle, Inc.

Increases valve timing accuracy by eliminating timing chain lash and the loosely fit stock cam drive sprockets. This is accomplished by replacing the stock components with light press fit S&S gear drive cams. Because the chain, chain guides and tensioner are eliminated, there is no longer a possibility for these parts to fail and damage other parts. These kits reverse the rear cam s direction of rotation and provide additional operating clearance between cam lobes, permitting the use of higher lift cams. When updating from the stock chain drive system, it is easiest to order one of these complete kits which include camshafts with inner gears, an outer cam drive gear kit, an S&S cam bearing plate, and the camshaft installation kit. S&S gear drive camshafts must be used with S&S gear drive components. Six cam profiles are available to cover a wide variety of engine displacements and compression ratios. With the exception of the bolt in 510G cam set (CC #601770), S&S gear drive cams are high lift and were designed to take advantage of the extra flow of ported stock heads or S&S Super StockTM cylinder heads. Due to the high lift of these cams, adjustable pushrods and high-performance valve springs are required for installation. If replacing cams in an engine already equipped with S&S gear drive cams, order the Gear Drive Cams with Inner Gears ONLY and reuse the existing gears. A CC #46752 camshaft installation kit is recommended. If installing a gear drive cam set without inner gears from another cam manufacturer, a CC #46760 cam gear drive kit provides the inner cam gears as well as an outer cam drive gear kit. A CC #46752 camshaft installation kit and a CC #601119 S&S cam bearing plate are also recommended. Fit all Twin Cam 88 engines from 1999 to present.



Shipping dimensions: 8.00" x 10.00" x 1.00"
Approximate Weight: 0.50 lbs

Checking stock and price
CCI-46752

We Ship Internationally!
Ask us for a quote

How much is shipping?

Ask us about this item
24601Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
CRANE CAN SET MILD PERFORMANCE WITH STOCK COMPRESSION RATIOS TO 9.5:1 505 LIFT 236/242 DURATION USE OEM#996 25466-99 AND 694 TO INSTALL. FITS TWIN CAM MODLES FROM 1999 TO PRESENT. 310 GRIND MFG# 1-3001
24604Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
CRANE CAM SET MODIFIED BIG BORE COMPRESSION RATIO 10.5:1 UP HEADS MODIFIED.600 LIFT & 254/260 DURATION. USE OEM#996 25466-99 AND 694 TO INSTALL.FITS TWIN-CAM 1999 TO PRESENT MUST USE CRANE VALVE SPRINGS MFG#1-3004
24602Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
CRANE CAM SET STREET PERFORMANCE STOCK TO 10.1:1 COMPRESSION RATIOS 505 LIFT 242/252 DURATION USE OEM#996 25466-99 AND 694 TO INSTALL. FITS TWIN CAM MODELS FROM 1999 TO PRESENT. 316 GRIND MFG#1-3002
614636Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
550 LIFT CAM/GEAR DRIVE 99-06 288155G
24584Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TWIN-CAMSHAFT KIT FOR 99 ENGINES DESIGNED FOR 95 INCH CYCLINDER AND HEADWORK. MODIFICATIONS.
601817S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
625G CAMS FIT 06 DYNA & 07 BIGTWINS 33-5269
614637Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
560 LIFT CAM/GEAR DRIVE 99-06 288160G
46758S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM CAMSHAFT SET WITH INNER GEARS. .625 VALVE LIFT DESIGNED FOR ENGINES OF 95 CUBIC INCHES OR MORE WITH COMPRESSION RATIOS BETWEEN 10 TO 10.5:1 CRANKCASE MODIFICATION REQUIRED MFG# 33-5170
601818S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
540G CAMS FIT 06 DYNA & 07 BIGTWINS 33-5270
614630Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
498 LIFT CAM/GEAR DRIVE 99-06 288121G
601771S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S GEAR DRIV CAMSHFT KIT 570G FITS 1999-UP TC 33-5178
601774S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S GEAR DRIV CAMSHFT KIT 640G FITS 1999-UP TC CRANKCASE CLEARANCE MUST BE MADE TO INSTALL 33-5181
24600Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
CRANE CAM SET GOOD LOW END TORQUE AND MID-RANGE H.P. WITH STOCK COMPRESSION. 505 LIFT 226/236 DURATION. USE OEM#996 25466-99 AND 694 TO INSTALL. FITS TWIN CAM MODELS FROM 1999 TO PRESENT. 300 GRIND MFG#1-3000
24603Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
CRANE CAM SET MODIFIED BIG BORE 95C.I. UP & COMPRESSION RATIO 9.5 :1 570 LIFT 240/248 DURATION.USE OEM#996 25466-99 & 694 TO INSTALL.FITS TWIN-CAM 1999 TO PRESENT MUST USE CRANE VALVE SPRINGS. 290 MFG#1-3003
601815S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
570G CAMS FIT 06 DYNA & 07 BIGTWINS 33-5267
24605Crane  Hi-Roller  Cams for Twin Cam 88 ModelsCrane  Hi-Roller Cams for Twin Cam 88 Models
HOT STREET PERFORMANCE CAM FOR TWIN CAM MODELS. FOR MODIFIED ENGINES 10.25:1-UP COMPRESSION BIG BORE AND HEAD MODS. REQUIRES.600 LIFT SPRING KIT. DESIGNED FOR EDELBROCK PERFORMER RPM HEADS
601772S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S GEAR DRIV CAMSHFT KIT 585G FITS 1999-UP TC 33-5179
46759S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM CAMSHAFT SET WITH INNER GEARS. .640 VALVE LIFT DESIGNED FOR ENGINES OF 95 CUBIC INCHES OR MORE WITH COMPRESSION RATIOS OF 10.5 TO 11.5:1 CRANKCASE MODIFICATION REQUIRED. MFG# 33-4275
614631Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
490 LIFT CAM/GEAR DRIVE 99-06 288126G
24582Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TWIN-CAMSHAFT KIT FOR 99 ENGINES. DESIGNED FOR 80+ REAR WHEEL HORSEPOWER. SMOOTH IDLE AND BROAD TORQUE BAND.
614634Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
555 LIFT CAM/GEAR DRIVE 99-06 288154G
601814S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
510G CAMS FIT 06 DYNA & 07 BIGTWINS 33-5266
601816S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
585G CAMS FIT 06 DYNA & 07 BIGTWINS 33-5268
601770S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S GEAR DRIV CAMSHFT KIT 510G FITS 1999-UP TC 33-5177
614635Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
510 LIFT CAM/GEAR DRIVE 99-06 288150G
46757S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM CAMSHAFT SET WITH INNER GEARS. .585 VALVE LIFT DESIGNED FOR 88-95 CUBIC INCH ENGINES WITH COMPRESSION RATIOS FROM 10 TO 10. 5:1 MFG# 33-5168
614633Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
510 LIFT CAM/GEAR DRIVE 99-06 288137G
601773S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S GEAR DRIV CAMSHFT KIT 625G FITS 1999-UP TC CRANKCASE CLEARANCE MUST BE MADE TO INSTALL 33-5180
24587Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TW21 CAM KIT FOR TWIN-CAM 88.BOLT IN KIT WITH MORE TORQUE FOR ALL AROUND RIDING WITH STOCK COMPRESSION RATIO AND HEAVY BIKES.220/228 DURATION..498 LIFT FITS TWIN-CAM MODELS 1999 up MFG# 228121
601821S&S Gear Drive Cam Kits for Twin Cam Engines (2007-Present)S&S Gear Drive Cam Kits for Twin Cam Engines (2007-Present)
Cam drive gear kit for 2007 to present Big Twins (includes front and rear inner cam gears, pinion gear, and outer cam gear)
601820S&S Gear Drive Cam Kits for Twin Cam EnginesS&S Gear Drive Cam Kits for Twin Cam Engines
Outer cam drive gear kit for 2007 to present Big Twins
24588Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TW26A CAM KIT FOR TWIN-CAM 88.BOLT IN KIT FOR LOWER RPM TORQUE.FOR TWO-UP TOURING.WILL ADD TORQUE & HORSEPOWER AT LOWER AND MIDDLE RANGE(1800-5500 RPM) FITS TWIN-CAM 1999-UP MFG# 288126
46753S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM 88 CAMSHAFT GEAR DRIVE KIT. FITS 99-UP T/C ENGINES. ELIMINATES OEM CAM GEARS AND TIMING CHAIN. CREATING MORE ACCURATE VALVE TIMING AND MORE CLEARANCE BETWEEN CAM LOBS. MFG# 33-4276
24590Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TW55 CAM KIT FOR TWIN-CAM 88.HI-LIFT CAMS FOR MAXIMUM TORQUE AND HORSEPOWER.88-95 CI ENGINES WITH 9.5 OR HIGHER COMPRESSION RATIO.248/252 DURATION 550 VALVE LIFT. FITS TWIN-CAM 1999-UP MFG# 288155
46752S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S T/C 88 CAMSHAFTS INSTALLATION SUPPORT KIT. INCLUDES COVER GASKET BOTH BEARING SETS AND SNAP RING.RECOMMENDED FOR USE WITH ANY S&S CAM SETS FOR TWIN CAM MOTORS. MFG# 33-5163
601119S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S HVY-DUTY CAM BEARING PLATE RECOMMENDED FOR USE WITH ALL GEAR DRIVE CAMS FOR USE ON TWIN CAM 88 ENGINES 33-5212
46760S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM 88 CAM GEAR DRIVE KIT. INCLUDES PINION GEAR FRONT AND REAR INNER CAM GEARS AND OUTER CAM GEAR. FOR THOSE SWITCHING FROM GEAR SET TO GEAR SET WHEN EXPERIMENT WITH CAMSHAFTS MFG# 33-4275
46756S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S TWIN CAM CAMSHAFT SET WITH INNER GEARS. .570 VALVE LIFT DESIGNED FOR 88-95 CUBIC INCH ENGINES WITH COMPRESSION RATIOS BELOW 0.417361111111111 MFG# 33-5166
24583Andrews Cams for Twin Cam 88 ModelsAndrews Cams for Twin Cam 88 Models
ANDREWS TWIN-CAMSHAFT KIT FOR 99 ENGINES. DESIGNED FOR HORSEPOWER AT HIGHER RPM RANGES. 9.5.1 COMPRESSION AND 88-95 INCHES.
012029S&S Gear Drive Cam Kits for Twin Cam 88 EnginesS&S Gear Drive Cam Kits for Twin Cam 88 Engines
S&S 510G CAM W/INNER GEARS F/TIM CHN REPL 1999-UP TC88

This part is not available for internet sales

So why buy from Retrocycle??

  • We know Bikes: we use these parts ourselves and can help you check for fit. Contact us anytime for help or advice.
  • Fast Shipping
  • Fair Prices
We are not some fly-by-night internet shop: our brick-and-mortar store in North Jersey has been around for years!
Facebook
Vintage Harley Parts    |    Blog    |    Motorcycle Repair    |    Hours and Location    |    Links    |    Parts and Accessories    |    Restoration    |    Powder Coating    |    CAD Plating Parkerizing
Policies    |    Bike Storage    |    Advertising    |    Sell Your Bike    |    Current Auctions    |    Sitemap    |    Bike Gallery    |    Les Dunham    |    Metal Polishing