622151: Gear Drive Cam Plate for Twin Cam Gear Drive Feuling Part 8000 (OEM: 8000)
Picture may not correctly represent this product.
See in 2011 Catalog
|By Feuling Oil Pump Corporation|
FITS: T/C 99-06 Except 06 Dyna, Gear Drive, Requires FEULING oil pump #7000 or #7050, Fits both chain drive or gear drive camshafts, Billet 7075, drops engine temps 20-35 degrees cooler than Screamin Eagle or other aftermarket camplates.
Increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The cam plate is blue printed and matched to the Fueling oil pump which allows the engine to take full advantage of the increased volume from the Fueling oil pump. Made from 7075 billet aluminum and hard anodized which increases the strength and hardness of the camplate, holds tighter tolerances under temperature and eliminates the pinion shaft bushing. Increased oil flow to pinion shaft and connecting rod bearings. Tighter cam bearing bore tolerance for improved press fit. Pressure relief valve and spring are designed for increased volume and pressure, eliminating the need to stretch the spring or use a shim. Decreases engine temperature by 20 degrees. When matched with the Fueling Race Pump rear wheel power gains of three horsepower and four ft/lbs of torque are achieved. For use ONLY with the Feuling oil pumps. Includes bearing retainer plate and hardware. Bolts into stock location.
Shipping dimensions: 8.25" x 8.75" x 2.00"
Approximate Weight: 1.98 lbs
So why buy from Retrocycle??
- We know Bikes: we use these parts ourselves and can help you check for fit. Contact us anytime for help or advice.
- Fast Shipping
- Fair Prices