Retrocycle Harley Motorcycle Parts


1 Mars Ct. Unit 3
Boonton, NJ 07005
973-291-8588
 

0 Items in cart
Featured Bike:
1967 FLH Shovelhead

Evo Camshafts

  Previous PageSee PDF versionNext Page  
Page 1
background image
24
V-Thunder EVL-2015 Camshaft.
The first cam designed specifically for fuel inject-
ed engines. Increases power across the board, and is designed to be used with
high flow mufflers, V-Thunder Injection Overdrive and air cleaner bracket plate.
Camshaft Timing Valve Duration
TDC
At .053"
Tappet Lift
Lift
Lift
Intake
20/24
.500"
224
.182"
Exhaust
49/5
.500"
234
.110"
V-Thunder
EVL-2015 1995-99 FL models.
VT No. 10-1147
VT No.
Year
Application
P/N
Duration
Valve Lift
Valve Timing
Lift @ TDC
Hydraulic
@ 053
Open/Close
Intake
Exhaust
Intake
Exhaust
Intake
Exhaust
Intake
Exhaust
10-5000
84-99
Good for stock replacement
EVL2000
220
214
.480"
.456"
2/38
35/1
.059"
.049"
10-5001
84-99
Good for two-up riding and
EVL3000
224
224
.500"
.500"
10/34
34/10
.080"
.080"
pulling trailers
10-5002
84-99
Good low end torque &
EVL3010
234
234
.500"
.500"
15/39
39/15
.096"
.096"
midrange in stock motor
10-5003
84-99
Strong midrange pipes, carb
EVL3020
240
240
.500"
.500"
18/42
42/18
.106"
.106"
10-5004
84-99
Strong midrange good roll-on in
EVL3030
240
240
.530"
.530"
16/44
44/16
.099"
.099"
high gear. Carb, pipes & headwork
10-5039
84-99
Mild performance in light bike.
EVL3040
242
242
.510"
.510"
17/45
50/22
.101"
.117"
Pulls hard through power range.
Need carb pipes and valve springs.
10-5006
84-99
Good perf. with carb, pipes
EVL3050
252
252
.510"
.510"
22/50
50/22
.117"
.117"
& springs. More top end.
10-5007
84-99
Hot streets/strip cam for light
EVL3060
260
270
.585"
.585"
24/56
61/29
.129"
.139"
bike. Pulls to 7,000. Head-
work carb, & pipes a must.
10-5008
84-99
Hot streets/strip cam.
EVL3070
270
274
.608"
.608"
29/61
63/31
.144"
.149"
Recommended for big inch motors.
Must increase compression. Valve
springs, headwork, carbs & pipes a
must. 7,000 RPM
V-Thunder by Comp Cams X-Treme Energy Cams
for 1984-99 Evolution Big Twins are designed to maximize torque, acceleration and throttle response while provid-
ing excellent high RPM horse power.
Duration Valve Lift Valve Timing
Lift@TDC
@ .053
Open/Close
VT No.
Application
In
Ex
In
Ex
In
Ex
In
Ex
10-5033
Excellent low end & mid range power from idle to 5300 RPM
230
230
562
.562
17/33
41/9
.172
.130
10-5034
Strong low end and mid range power. Power from 1500-5500 RPM
236
236
.569
.569
18/38
42/14
.177
.158
10-5035
Increased mid and top end power. Performs best from 1800-5800 RPM.
244
244
.585
.585
22/42
48/16
.203
.171
10-5036
Great mid and upper end power in modified
252
252
.585
.585
26/46
52/20
.228
.182
motors. For increased compression (9.5:1)
10-5037
For 88 cu in. engines and up with 10:1
260
260
.585
.585
28/52
56/24
.239
.216
compression.Good for up to 6500 RPM.
10-5038
For serious power in 88 cu in and up with 10.5:1 compression.
268
272
.601
.601
32/56
64/28
.263
.240
1984-99 Cam for Evo
Duration .053" Gross Valve Lift
Open/Close
VT No.
Int.
Exh.
Int.
Exh.
Series
Type and Application
Grind#
10-8255
226
236
.490
a
.490
a
Hydraulic
12/34
41/15
Fire Ball
300-2B
10-8535
236
242
.490
a
.490
a
Hydraulic
16/40
43/19
Fire Ball
310-2
10-4386
242
252
.490
a
.490
a
Hydraulic
19/43
48/24
Fire Ball
316-2B
10-4387
252
262
.490
a
.490
a
Hydraulic
24/48
57/25
Fire Ball
326-2
10-4377
242
252
.490
a
.490
a
Hydraulic
19/43
48/24
Hi-Roller
H286-2B
10-4378
252
262
.490
a
.500
a
Hydraulic
24/48
57/25
Hi-Roller
H296-2
10-4379
262
272
.500
a
.510
a
Hydraulic
28/54
69/23
Hi-Roller
H306-2
10-4388
266
276
.550
a
.550
a
Hydraulic
23/63
68/28
Hi-Roller
H310-2
CAMS
for Big Inch Motors (Head Machining Required)
10-8169
240
248
.581
.581
Hydraulic
17/43
45/23
Hi-Roller
H290-2
Note:
a
Gross Valve lift for Evo with 1.6 Rocker Arm Ratio.
To convert cam lift to valve lift, multiply the cam lift figure by the Rocker Arm Ratio: Evo-1.6
Hydraulic-Bolt-in. Broad power range for streetable performance. Works well with stock compression ratio and
stock exhaust. No spring change required. Basic RPM idle-4000. Does not have multi-index gear. Cam lift at
TDC: Int: .094" Exh.: .093".* Replaces EV-13.
Hydraulic-Bolt-in Street performance for heavier bikes that are slightly modified. Can be used with stock compres-
sion or increased up 9.5:1. Complements exhaust and intake modifications. No spring change required. Basic
RPM 1500-4500. Replaces EV-3. Cam lift at TDC: Int: .101" Exh.: .114".*
Hydraulic-Bolt-in designed for speed or touring. Works well with engine modifications. Works best with
9.5:1 compression ratio. Early Evo's that do not have notched pistons must be checked for valve to pis-
ton clearance. Basic RPM 2000-5000. Replaces EV-35. Cam lift at TDC: Int: .110" Exh.: .127".*
Hydraulic-Performance Cam.Mid-range & upper RPM improvement.Works best with 10:1 comp.ratio.Works well with perfor-
mance carb & exhaust.Excellent for modified touring bikes.May require valve spring change.Check all clearances.Basic RPM
2500-5500.Replaces EV-5.Cam lift at TDC:Int:.125"Exh.:.129".*
Hydraulic-Bolt-in for speed or touring.Works well with engine modifications.Works best with 9.5:1 comp. ratio. Does not
require valve spring change. Early Evo's that do not have notched pistons must be checked for valve to piston clear-
ance. Basic RPM 2000-5000. Cam lift at TDC: Int: .110" Exh.: .127".*
Hydraulic-Performance Cam. Mid-range and upper RPM improvement.Works best with 10:1 compression ratio and
performance carb and exhaust. Excellent for modified touring bikes. May require valve spring change. Check all clear-
ances. Basic RPM 2500-5500. Cam lift at TDC: Int: .125" Exh.: .129".*
Hydraulic-Performance Cam. Mid-range and upper RPM power. Works best with 10.5:1 compression r atio.
Can be used with stock heads. Clearancing and valve spring change required. Excellent stroker cam. Basic
RPM 3000-6000. Cam lift at TDC: Int: .140" Exh.: .122".*
Hydraulic-Performance Cam. Designed for larger cubic inch and decreased compression r atios. Street-strip type
performance 88cu. in., 10.5:1 compression ratio and up. Heads must be clearanced and have performance valve
springs installed. Basic RPM depends on the combination, approximately 3000-6500. Cam lift at TDC: Int: .143"
Exh.: .143".*
Hydraulic-Performance Cam is designed for stock cubic inch Evo's that have increased compression and/or perfor-
mance head work. Must have the heads clearanced for .581" lift.Will produce strong low- and mid-range power with
appropriate intake, heads and exhaust. Up to 88cu. in. Basic RPM depends on the combination, approximately 1800-
5200 RPM.
Camshaft for Evo
    
V-Twin or
(Harley #)
DescriptionPrice
10-1147V-thunder Evl-2015 Camshaft$172.79 EA
Discontinued
10-5000Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5001Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5002Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5003Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5004Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5039Complete Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5006Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5007Competition Camshaft
Evolution cam shaft
$174.14 EA

10-5008Competition Camshaft
Evolution cam shaft
$229.29
$217.83 EA

10-5033V-thunder Xtreme Energy Cam
V-thunder x-treme energy cam evolution
$178.43 EA

10-5034V-thunder Xtreme Energy Cam
V-thunder x-treme energy cam evolution
$229.29
$217.83 EA

10-5035V-thunder Xtreme Energy Cam$172.79 EA
Discontinued
10-5036V-thunder Xtreme Energy Cam
V-thunder x-treme energy cam evolution
$229.29
$217.83 EA

10-5037V-thunder Xtreme Energy Cam
V-thunder x-treme energy cam evolution
$178.43 EA

10-5038V-thunder Xtreme Energy Cam
V-thunder x-treme energy cam evolution
$229.29
$217.83 EA

10-8255Crane Fireball 300-2 Cam
Crane hydraulic fireball cam
$192.71 EA

10-8535Crane Fireball 310-2 Grind Cam
Crane hydraulic fireball cam 310-2
$192.71 EA

10-4386Crane Fireball 316-2 Grind Cam
Crane fireball cam 316-2b grind
$192.71 EA

10-4387Crane Fireball Cam 326-2 Grind
Crane fireball cam 326-2 grind
$142.86 EA

10-4377Crane Hydraulic Hi-roller Cam
Crane hydraulic hi-roller cam h286
$142.86 EA

10-4378Crane Hydraulic Hi-roller Cam
Crane hydraulic hi-roller cam h296-2
$142.86 EA

10-4379Crane Hydraulic Hi-roller Cam
Crane hydraulic hi-roller cam
$142.86 EA

10-4388Crane Hi-roller Cam, H310-2 Grind
Crane hi-roller cam h310-2 grind
$142.86 EA

10-8169Crane Hi-roller Camshaft 1-1004
Crane hi-roller evolution cam h290-2
$214.29 EA

Facebook
Vintage Harley Parts    |    Blog    |    Motorcycle Repair    |    Hours and Location    |    Links    |    Parts and Accessories    |    Restoration    |    Powder Coating    |    CAD Plating Parkerizing
Policies    |    Bike Storage    |    Advertising    |    Sell Your Bike    |    Current Auctions    |    Sitemap    |    Bike Gallery    |    Les Dunham    |    Metal Polishing