Blacked out Panhead Replica Engines by Vulcan
These engines are just fantastic! The craftsmanship and
care taken in the assembly is hard to find these days.
Get that Panhead look in a modern, hydraulic lifter,
Evo-type engine.
Buy the engine here
Cylinders
Cast From Closed Grain Nodular Iron
3-5/8” Big Bore
Extra Thick Base Flange
High Crown Heat Treated Base Nuts
Keith Black 8.5:1 CR Pistons (80 CC Dome )
Hastings Ring Pack
Seal Methods Head & Base Gaskets
High Gloss Black Powder Coated Cylinders
5.330” Cylinder Length
Cylinder Heads
S.T.D. High Performance
Shovel Head Style Port Layout
Ported Intake & Exhaust Ports
3 Angle Serdi Valve Seats
Manley Valve Guides, Honed To Size
320 CFM Intake Port
250 CFM Exhaust Port
108 cc Combustion Chamber
Dual Spark Plugs
Cam Chest
Vulcanworks Billet Cam Cover
Vulcanworks Breather Baffle
Jims Machine Pinion Gear
Vulcanworks Distributor Drive Gear
Vulcanworks Dist. Gear Shaft
Vulcanworks Steel Breather Gear
Seal Methods Cave Cover Gasket
Accessories
Billet Oil Filter Adapter
Rev Tech Oil Filter
Stainless Steel Braided Rocker Feed Oil lines
Billet Aluminum Oil Line/Oil Gage Adapter
Oil Pressure Gage |
Valve Train
Vulcanworks EVO Style Hydraulic Lifters
Vulcanworks Billet Aluminum Tappet Blocks
Vulcanworks Chromemoly Pushrods
Colony Pushrod Tubes
Andrews Special Grind Camshaft, .485 Lift
OEM Style Rocker Arms, Blueprinted
Vulcanworks Billet Aluminium Valve Covers
Grade ‘8’, 12 Point Rocker Arm Block Bolts
Manley 2.00” Hard Chromed Intake Valves
Manley 1.750” Hard Chromed Exhaust Valves
Manley Double Wound Valve Springs
Manley Heat Treated Valve Keepers
N.O.K. Viton Valve Seals
Ignition
Vulcanworks Billet Aluminum Distributor
Heat Treated Auto Advance
Single Or Dual Fire
Uses 3 or 5 Ohm Coils
2. Champion Spark Plugs # RN14Y
Oil Pump
Vulcanworks, Billet aluminum, 1981-1991 Style
Vulcanworks Oil Pump Drive Gear
1973- Drive Ratio
Fuel System
S&S Super ‘E’
Band Style Intake
S&S Air Cleaner Assembly
Also Included Is a Vulcanworks Billet Velocity Stack / With Air Diverter |
Contact Us for details and pricing
This entry was posted
on Monday, December 14th, 2009 at 12:25 am and is filed under Engines.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
looking for the bearings and retainer for the pinion shaft part number is 24718-52 it is for a 1952 K model if anyone has one or could lead us in the right direction to find one i would really appreciate it can call also 618-797-1499 after 11:00a email is hogdoc2@sbcglobal.net